Industrial 230V AC Mains-Powered LED Traffic Blinker Light
The Electricity Blinker Light (Model EI-ETB-01p) engineered by Enpowers International is a high-reliability, continuous-duty visual warning system specifically designed for grid-connected urban intersections, toll plazas, median points, and heavy industrial plant road networks.
While off-grid solar units are ideal for remote highways, urban traffic networks and dense canopy expressways often benefit from direct 230V AC, 50Hz mains power. This eliminates solar panel shading constraints and ensures round-the-clock luminous intensity without battery replacement cycles.
Engineered to Highway Authority Standards
Manufactured strictly according to NHAI (National Highways Authority of India) and IRC norms, this model is built using an ultra-low-consumption solid-state driver circuitry (<4W total consumption) paired with crystal clear 5mm Everlight LEDs, guaranteeing visibility beyond 500 meters under adverse fog and nocturnal road conditions.
| Parameter | Technical Specification Details |
|---|---|
| Model Number | EI-ETB-01p |
| Operating Input Voltage | 230V AC, 50Hz (Grid / Mains Operated) |
| Configuration Type | Single Sided / Dual Sided Signal Blinker Light |
| Number of LEDs | 166 High-Output Solid State LEDs |
| LED Type & Make | 5mm crystal clear Everlight make (High Photometric Integrity) |
| LED Aspect Diameter | 300 mm diameter (Full Compliance with NHAI/IRC Norms) |
| Available Aspect Colors | Amber (Caution) / Red (Stop/Hazard) / Green (Directional) |
| Power Consumption | Ultra-efficient < 4 Watts (Full Load) |
| Viewing Angle | 23° Dispersion Angle for optimal driver focal capture |
| Dominant Wavelength | Amber: 590 ± 5 nm | Red: 625 ± 5 nm |
| Driver Circuit Efficiency | Greater than 90% with integrated surge protection |
| Standby Current | Less than 2 mA |
| Controller Electronics | Integrated embedded card with transient voltage & reverse surge protection |
| Visual Range | Over 500 meters during day, night, rain and fog |
| Housing Material | Impact-resistant, UV-stabilized Polycarbonate enclosure |
| Ingress Protection | IP65 Dust-tight and Water-jet proof certified |
Key Engineering Benefits for Global Contractors
Enpowers International delivers factory-direct compliance, rigorous ingress sealing, and long-term operating durability across overseas procurement tenders.
Ultra-Low Energy Draw
Operating at under 4 Watts, the solid-state design delivers massive utility savings over conventional halogen systems, minimizing corporate operational expenditure.
Weatherproof Polycarbonate
Molded from virgin UV-stabilized polycarbonate, the IP65-rated luminary withstands prolonged tropical heat, coastal humidity, and highway vibration stresses.
Everlight LED Uniformity
Packed with 166 calibrated Everlight LEDs, each unit projects uniform chromaticity with sharp cutoffs, preventing optical distortion and driver blinding.
Procuring for Municipal, Highway or Industrial Projects?
Connect with our technical export engineers in Ahmedabad, India for volume quotation pricing, photometric test certificates, and shipping schedules.