Export Sales: +91 96012 58123 [email protected] Exporting to 20+ Countries

Solar Lighting System

Energy-efficient standalone and integrated off-grid solar LED lighting solutions for highway infrastructure, regional transit corridors, and heavy industrial facilities.

Engineered For Zero Grid Dependency

High-Efficiency Solar Lighting Solutions for Road Networks

Overhead utility power drops and lengthy underground cable trenching represent the largest capital expense and maintenance liability for expansive highways and rural transit corridors. Our engineered solar lighting systems solve these challenges through autonomous, solar-powered operation backed by intelligent MPPT battery management and weather-resilient LED optics.

Standalone System Split solar LED street light system with separate PV panel and pole battery enclosure

Solar LED Street Lights

Heavy-duty split-configuration solar street light system designed for high-lumen demands on multi-lane highways, border logistics corridors, and broad toll plaza approaches. Accommodates high-wattage monocrystalline PV modules and deep-cycle battery banks to secure 3 to 5 continuous days of overcast backup.

15W to 120W LED Array
IP65 / IP66 Housing
3-5 Rainy Days Autonomy
Type II / Type III Optics
Integrated Solution All-in-one integrated solar street light luminaire

All in One Solar LED Street Lights

Next-generation streamlined solar luminaire integrating the solar PV module, Grade-A LiFePO4 battery pack, smart micro-controller, and high-efficiency LED module into a single die-cast aluminum enclosure. Eliminates external wiring, simplifies pole erection, and features automated PIR motion sensing to optimize energy use.

LiFePO4 Battery Core
Built-in PIR Sensor
Rapid 10-Min Mounting
Die-Cast Aluminum Body
Engineering Specifications

Built to Resist Extreme Ambient Operating Environments

Industrial highway lighting requires resilient thermal dissipation, dust-tight sealing, and uncompromised battery longevity. Manufactured in our Ahmedabad manufacturing plant, Enpowers solar lighting systems undergo stringent photometric and environmental verification to guarantee full illumination performance under high ambient heat, coastal salinity, and prolonged seasonal monsoons.

Our split-type and all-in-one systems are designed with high-flux LEDs (up to 160 lm/W) paired with bat-wing optical lenses to achieve uniform road lux distributions adhering to international highway roadway standards without hot-spots or optical glare.

High-Grade Monocrystalline Solar Cells

Conversion efficiencies exceeding 21.5% ensure rapid battery charging even during diffuse daylight and low-sun winter angles.

Lithium Iron Phosphate (LiFePO4)

Over 2,000 deep discharge cycles at 80% DOD deliver a maintenance-free service life spanning upwards of 6 to 8 operational years.

Intelligent Dusk-to-Dawn Control

Micro-controlled optical sensing automatically initiates twilight activation and dawn shutdown, with customizable multi-stage dimming profiles for midnight battery conservation.

IP65/IP66 Ingress Defense

Corrosion-treated die-cast aluminum alloy housings with tempered glass and silicone hermetic gaskets safeguard critical driver electronics against sand, downpours, and industrial fumes.

High-Efficiency MPPT Trackers

Advanced Maximum Power Point Tracking (MPPT) charging algorithms yield up to 30% greater power harvest compared to conventional PWM regulators during cloudy periods.

Technical Specification Comparison: Solar LED Street Lights vs Integrated All in One Systems
Technical Specification Standalone Solar LED Street Lights All in One Solar LED Street Lights
Rated System Wattage 15W / 24W / 36W / 60W / 90W / 120W 15W / 20W / 30W / 40W / 60W / 80W
Solar PV Module Type External Monocrystalline / Polycrystalline (50W - 350W) Integrated High-Efficiency Monocrystalline
Battery Chemistry Tubular Deep-Cycle Gel or External LiFePO4 Integrated Grade-A LiFePO4 Pack (12.8V / 25.6V)
Luminous Efficacy ≥ 140 - 160 Lumens / Watt ≥ 150 - 170 Lumens / Watt
Operational Autonomy 3 - 5 Consecutive Rain/Overcast Days 2 - 4 Days (Intelligent Dimming Profile)
Working Temperature Range -20°C to +65°C -10°C to +60°C
Recommended Pole Height 5 to 12 Meters (Highway & Main Carriageways) 4 to 8 Meters (Secondary Roads & Perimeters)
Installation Complexity Two-part modular erection with cable routing Single-bracket slip-fitter mount (<15 mins)

Need Tailored Solar Lighting Specifications for Tender Submissions?

Our technical design division prepares comprehensive lux simulations, pole spacing layouts, and solar irradiation autonomy calculations for government and EPC infrastructure tenders worldwide.

Get a Quote
Online Enquiry Contact Sales